Decorative Brickwork: Details That Can Lead to Rework

Mountain Rose and Old Town Red | H.C. Muddox

Decorative brickwork changes how a wall is built, not just how it looks. A projecting course can expose brick cores, a stack pattern can change reinforcement requirements and mixing brick sizes can affect alignment around openings.

Catching these differences before construction starts helps avoid adjustments on site.

Projecting and Recessed Brickwork

Setting brick forward or back from the wall face creates depth and shadow. It also changes which surfaces are exposed and how the masonry is supported.

One concern is exposed cores or perforations. A projecting course can reveal openings that would normally be concealed within the wall. Leaving these openings exposed to weather creates a potential path for moisture. Solid brick or special shapes may be needed to achieve the design without exposing these areas.

The finish of the brick matters too. For example, projecting glazed brick may reveal an unfinished surface. Selecting units with the appropriate finished faces helps maintain a consistent appearance.

Structural support is another consideration, particularly with brick veneer.

Brick veneer is a non-loadbearing facing that can use full-depth or thin brick. Full-depth veneer is generally supported by a foundation or shelf angles and tied to the structural backing. Thin brick commonly uses an adhered system. Each requires different support and attachment details.

The projection depth, brick orientation and supporting construction all determine how the feature is built. A unit that works in a conventional wall may not be suitable when turned or extended beyond the wall face.

Dark Ironspot | Endicott

Brick Patterns Affect Reinforcement and Layout

The bond pattern determines how brick is arranged within a wall. Changing that arrangement affects more than appearance.

In traditional stretcher bond, brick overlaps between horizontal courses, creating a staggered pattern. Stack-pattern brickwork aligns the vertical joints to form a continuous grid.

Without overlapping units, the masonry has less continuity across the vertical joints. Stack-pattern full-depth brick veneer therefore requires horizontal joint reinforcement under applicable Canadian masonry requirements. Adhered thin brick systems have different installation requirements.

Decorative patterns also change how the brick lines up around openings and corners.

For example, transitioning from stretcher bond to a stack pattern can change the position of vertical joints. Maintaining the intended arrangement may require additional cutting or special shapes, particularly where the pattern meets windows, doors or other materials.

A clear bond layout establishes how these transitions should be handled and keeps the pattern consistent across the wall.

Almond | Interstate Brick

Canyon Rose | Interstate Brick

Hit-and-Miss Brickwork

Hit-and-miss brickwork creates intentional openings between units, allowing light and air to pass through the wall.

Unlike conventional continuous brickwork, these openings interrupt the masonry and change how it is supported. Freestanding screens and other exposed applications need structural details designed for the arrangement of openings.

An open pattern also exposes more of each unit, including surfaces that would normally be hidden. Cores, perforations or unfinished faces may become visible.

The layout can create problems when the pattern meets a corner, column or opening.

For example, a screen may be designed with evenly spaced gaps across its width. If the layout doesn’t account for actual brick dimensions and mortar joints, the last gap beside a column could end up narrower than the others. Installers are then left adjusting the spacing or introducing cuts that change the intended pattern.

Working through the layout using actual brick dimensions helps maintain consistent openings. For complex designs, a sample panel provides a useful reference for spacing, alignment and workmanship.

Manganese Ironspot | Endicott

Combining Brick Colours and Sizes

Combining different brick colours and sizes introduces additional considerations for coursing, alignment and colour distribution.

Brick from different manufacturers or product ranges may have different actual dimensions, even when their nominal sizes are similar.

These differences become important where products meet. A small variation in brick height can affect how courses align, particularly around windows, corners and transitions between materials.

Mortar joints accommodate minor dimensional differences within the specified tolerances. Larger variations may require layout changes or additional cutting.

Colour variation also affects the finished appearance.

Some designs use a defined arrangement of colours, while others rely on natural variation for a blended appearance. Both approaches require a clear understanding of the intended result.

Even within the same product range, brick colour can vary between units and production batches. Blending brick from multiple packs helps distribute this variation across the wall rather than concentrating similar colours in noticeable patches.

Manufacturer blending recommendations should guide the work. A sample panel can also help establish expectations for the colour combination, mortar joints and overall appearance.

Onyx, Opus and Ovation | Hebron Brick

Review the Design and Materials Together

Architectural elevations show the intended appearance, but the selected brick and construction details determine how that appearance is achieved.

Reviewing the drawings alongside the actual product dimensions, available shapes and approved construction details helps identify issues that aren’t always obvious in an elevation. It’s easier to resolve these differences during planning than to adjust the brickwork once installation has started.

I-XL Building Products can provide product dimensions, help confirm the availability of special shapes and supply samples and manufacturer technical documentation. Contact our team for assistance with brick selection and detailing for your next project.

Scroll to Top